professional manufacturer of Coal slime dryer

TAIDA Mining and Metallurgy Equipment Co., Ltd., Zhengzhou Henan drying equipment is the core business, relying on the professional advantages and technological innovation, has successfully developed the production of slime, peat and high humidity drying materials series equipment for the different nature of the coal region mud, peat, sludge professional supporting products, equipment and stable operation, targeted, easy operation, low operation cost, the effect is very significant.

coal slime dryer works as follows: coal itself humidity, high adhesion, wet slurry during the drying process by conveyor into the slurry dispersed equipment, after fast break up the massive slime into the vacuum dryer was after work hours the following areas: First, derivative material area, the wet slurry to enter this area with high-temperature vacuum hot air after contact with large amounts of water evaporate quickly, slime copy in large lead angle board copy move, the bond will not form a working area to be imported under; Second, to clear areas, wet slime in this area are copied panel took a curtain forming material status, material falling wall when the drum is easy to form bonding phenomenon in As the equipment design, this area has cleaning device, cleaning device can quickly clean out the slime tube wall bond, in the process, the cleaning device group for the ball material agglomerate also played the role of fragmentation, thereby increasing the heat exchange area, increase the mass Heat and mass transfer efficiency, improve the drying rate; third inclined plate Yang District, this area is low-temperature drying zone, slime in this area has shown a low water loose state, this area has been the phenomenon does not have a bond through heat exchange After the finished product to achieve the required water demands, movement into the final discharge area; Fourth, discharge areas, drying the host drum in this area without copy board, the material in this area nesting population scroll slide to complete the drying process .